中文字幕人妻丝袜乱一区三区,手机在线精品无码观看

Current Location:Home Page » Service » Product Knowledge

[2016-5-9 10:00:33]What is the main cause of nc lathe into dao

Collision of the main reasons: one is the length of the cutting tool or grinding wheel diameter and input error;The second is about the size of the workpiece and other related geometry size input error and the initial position of the workpi
[2016-5-9 9:46:06]Long and thin screw, how long and thin axis on the nc machine tool processing

Than the large-diameter elongated screw thread and its length is 1:30 and above, it is called an elongated screw. Screw is a mechanical device transmitting motion member, is one of the rotary motion into linear motion parts, not only to pas
[2016-4-19 9:28:04]A typical shaft parts processing nc lathe

Numerical control lathe several typical control lathe parts processing, CNC lathe processing
[2016-4-19 9:10:33]What is the electric spindle of CNC lathe

Motorized spindle of CNC lathe is in recent years in the field of nc machine tools in the machine tool spindle and the spindle motor with new technology.High speed nc machine tool main drive system was cancelled pulley drive and gear drive.
[2016-3-31 9:33:19]Main parameters of numerical control lathe and the functional requirements for frequency converter

Most economical nc lathe is not automatic transmission, need to change, only the machine stop, then manual transmission.But most of full-function CNC lathe main drive system adopts stepless variable speed.Infinitely variable speed system ar
[2016-3-31 9:28:51]Numerical control instrument lathe commissioning and maintenance of nc machine tools

Machine operators must be been properly trained and qualified personnel, machine operators when using the machine, be sure to see familiar machine operation manual and understand its contents before operating the machine.
[2016-3-29 9:38:33]Disassembling numerical control instrument lathe

Main motor with horizontal pulley in pulley of offset and vertical two types of installation: Horizontal machine and machine tool in the same plane;Vertical motor installed at the bottom of the machine tool. Connection of the spindle and
[2016-3-29 8:46:31]CNC lathe electric tool post installation maintenance removal tutorial

First confirm the tool post fault, generally divided into two 1 electrical fault: transmitting coil, the control switch, the line...Part of the fault 2 mechanical failure;Such as scrap iron foreign body into the head card dead body, the mec
[2016-3-23 10:38:24]CNC lathe hydraulic pump system maintenance

1, the control of oil cleanliness The source of the pollution and harm: Measures of controlling contamination: 2, the control of hydraulic system leakage Hydraulic system leak of main parts and the reasons can be summarized the followin
[2016-3-23 10:14:06]How to avoid the numerical control lathe cutting fluid bubble?

In the use of cutting fluid, sometimes cutting fluid surface will produce a large number of bubbles.Affect the quality and precision of the numerical control lathe machining.Below bubble when processing the cause and the solution for simple
[2016-3-17 13:02:43]In CNC machine tool processing technology, the used tool

Cutting tool is used for cutting tools in machinery manufacturing, also known as the cutting tool.The vast majority of machine tool is used for, but also has a hand.Due to the cutting tools used in machinery manufacturing basically is used
[2016-3-9 10:20:31]Processing center in the composite material machining should pay attention to what issues?

Processing center in the composite material machining should pay attention to what issues?

日本高清aⅴ永久免费_国产三级理论在线网址_日韩亚洲欧美三级片免费看_国产在线观看免费人成视频